www.ferroalloynet.com: According to the statistics, the total output of V2O5 flake in 2020 is about 113161 tons, an increase of 19.6% over last year. It can be seen from the figure below that the monthly output in 2020 is higher than that in the same period of last year, and the overall output in 2020 shows a small growth trend, and the average monthly output in the second half of the year is stable at about 10100-10200 tons.
The following is the production of mainstream V2O5 flake manufacturers in 2019-2020:
The V2O5 flake output of Pangang in 2020 is similar to that of last year. In the first half of the year, the output is unstable and does not reach a constant. In the second half of the year, it is generally stable at about 3500 tons. The output of ChengSteel increases slightly, with a year-on-year increase of 9.9% (an increase of 1380 tons). Pangang and ChengSteel are mainly engaged in the production of vanadium alloys which are also sold abroad, followed by a small amount of export.
The mainstream V2O5 flake manufacturers are Tranvic, Desheng, Jianlong and DaSteel. The output in 2020 has increased to varying degrees compared with that of last year, especially the output of DaSteel increased significantly, with a year-on-year increase of 230%; The second is Tranvic, the output in 2020 shows a growth mode, with a higher output in the second half of the year, reaching an annual high of 1870 tons in December. In 2020, the output of Desheng Group is 11652 tons, an increase of 23% over last year; the total output of Jianlong Group is 13960 tons, an increase of 20% over last year.
www.ferroalloynet.com
